Kinney Spur and Penn Junction
Re: Kinney Spur and Penn Junction
Appreciate the pictures, J T. The picture of the lower level ROW is particularly interesting. IIRC the connection from the GTW to the PENN line was about a mile long and had to make the drop from the hi-line to the low.
PatC created a monster, 'cause nobody wants to see Don Simon no more they want AARR I'm chopped liver, well if you want AARR this is what I'll give ya, bad humor mixed with irrelevant info that'll make you roll your eyes quicker than a ~Z~ banhammer...
- amtrak1007
- MP 25 Productions Co-Founder
- Posts: 2978
- Joined: Wed Apr 12, 2006 12:55 am
- Location: Fisher FB97
- Contact:
Re: Kinney Spur and Penn Junction
Correct, started west of the bridge on the GTW (same switch as the siding IIRC) then traversed down to the GRI line.
-
- Roadmaster
- Posts: 4753
- Joined: Fri Dec 23, 2005 9:12 am
- Location: Grand Rapids, MI
Re: Kinney Spur and Penn Junction
It's actually downhill towrds the west from the bridge to the mainline switch to the connector track( C&M removed) and then uphill to switch (long gone) to the GR &I main. Interestingly all the Triick property and some other in the area was owned by the GTW land holding company. They apparently thought there was potential for some industry to locate there. John Tricks grandfather? bought the land from the RR.amtrak1007 wrote:Correct, started west of the bridge on the GTW (same switch as the siding IIRC) then traversed down to the GRI line.
- amtrak1007
- MP 25 Productions Co-Founder
- Posts: 2978
- Joined: Wed Apr 12, 2006 12:55 am
- Location: Fisher FB97
- Contact:
Re: Kinney Spur and Penn Junction
Thanks RDD its been years since Rick B and I walked that line.Raildudes dad wrote:It's actually downhill towrds the west from the bridge to the mainline switch to the connector track( C&M removed) and then uphill to switch (long gone) to the GR &I main. Interestingly all the Triick property and some other in the area was owned by the GTW land holding company. They apparently thought there was potential for some industry to locate there. John Tricks grandfather? bought the land from the RR.amtrak1007 wrote:Correct, started west of the bridge on the GTW (same switch as the siding IIRC) then traversed down to the GRI line.
- ~Z~
- Sofa King Admin
- Posts: 12971
- Joined: Tue Oct 12, 2004 2:14 pm
- Location: Grand Rapids, MI
- Contact:
Re: Kinney Spur and Penn Junction
Since we're chatting about this connector... is it because of the farmer's property that the trail (that awesome Raildude's Dad was apart of) goes across the original ROW, hugs along it just to the northeast of it for 1/2 mile or so, then resumes on it's original lie? See map link: https://goo.gl/maps/aSeBa
When biking it, there's a large pile of debris at the northwest portion of the farmer's property that has "no trespassing" signs on it and the debris blocks the ROW.
When biking it, there's a large pile of debris at the northwest portion of the farmer's property that has "no trespassing" signs on it and the debris blocks the ROW.
Webmaster
Railroad photos on Railroadfan.com
Railroad photos on Railroadfan.com
Re: Kinney Spur and Penn Junction
Doesn't help that a good portion of the ROW is someone's private drive to the southeast of where it first crosses the ROW and down to 4 Mile Rd. I've often wondered myself what the deal was with that short section of the ROW being off limits. Perhaps the farmer uses it to get from one area of his land to another?
https://www.flickr.com/photos/jimthias/
GRHC - you know every night I can imagine he is in front of his computer screen sitting in his underwear swearing profusely and drinking Blatz beer combing the RailRoadFan website for grammatical errors.
GRHC - you know every night I can imagine he is in front of his computer screen sitting in his underwear swearing profusely and drinking Blatz beer combing the RailRoadFan website for grammatical errors.
Re: Kinney Spur and Penn Junction
Sorry to bring up an older thread, but the subject matter is fitting. On a trip today, we were checking out certain places along the C&M. Just west of the old penn junction switch, on the north side of the tracks, is a grade for what appears to be a wye. It is obvious through the trees, and I confirmed it on Google earth. No sign of a switch ever being there, and there would have to have been a small trestle over the ditch. Was there ever a track in there, or was the grade built on speculation without any track ever being laid? If there was a track there, when did it get removed?
Also, the switch at Penn junction had an electrical box next to it. The derail at St. Mary's has the same electrical box. The derail on the east track at Meijer's warehouse has a very elaborate sensor and electrical box with what looks like a large signal relay in it (encased in glass). I assume the one at Penn junction was to indicate switch position for the signals/operator. What would the ones on the derails be for? My guess is that they were tied into the signals at westbound Fuller and eastbound Penn jct, giving a caution signal if a derail was down. Both derails are on a steep grade.
Also, the switch at Penn junction had an electrical box next to it. The derail at St. Mary's has the same electrical box. The derail on the east track at Meijer's warehouse has a very elaborate sensor and electrical box with what looks like a large signal relay in it (encased in glass). I assume the one at Penn junction was to indicate switch position for the signals/operator. What would the ones on the derails be for? My guess is that they were tied into the signals at westbound Fuller and eastbound Penn jct, giving a caution signal if a derail was down. Both derails are on a steep grade.
Re: Kinney Spur and Penn Junction
This is the location EW Rice is talking about. The 1945 topo map shows a siding on the GT here.
2016 Aerial imagery from Google Earth shows what I think is the feature in question. It sure looks like it could be a grade for a former wye leg. The 4/14/2016 imagery shows it most clearly. It shows up well on 1957 imagery on Historical Aerials but. I wonder if it wasn't instead a small dam. Perhaps there was once a mill of some kind here and that wasn't the reason for the siding. Any more thoughts?
For those of you that would like to explore Google earth on your own, the coordinates for this feature are 43° 2.015'N 85° 48.182'W
2016 Aerial imagery from Google Earth shows what I think is the feature in question. It sure looks like it could be a grade for a former wye leg. The 4/14/2016 imagery shows it most clearly. It shows up well on 1957 imagery on Historical Aerials but. I wonder if it wasn't instead a small dam. Perhaps there was once a mill of some kind here and that wasn't the reason for the siding. Any more thoughts?
For those of you that would like to explore Google earth on your own, the coordinates for this feature are 43° 2.015'N 85° 48.182'W
Re: Kinney Spur and Penn Junction
Well that's certainly an interesting find. Too bad it's not accessible from public property to view. I'd like to see that possible ROW in person.
https://www.flickr.com/photos/jimthias/
GRHC - you know every night I can imagine he is in front of his computer screen sitting in his underwear swearing profusely and drinking Blatz beer combing the RailRoadFan website for grammatical errors.
GRHC - you know every night I can imagine he is in front of his computer screen sitting in his underwear swearing profusely and drinking Blatz beer combing the RailRoadFan website for grammatical errors.
Re: Kinney Spur and Penn Junction
I think I found my answers. The grade was built on speculation and no tracks were ever laid. The siding shown on the map was the interchange track between GTW and GR&I/Pen. I was told it was pulled around '57, give or take a year.
The electrical box on the switch was for the signals on the GTW line, as well as a signal that was on the connecting track.
The the derail at St Marys had a lockout device controled by the operator at the plant.
The derail at Meijer also had a twin inside the fence at Delphi. They were interlocked with the overhead doors in the buildings.
The electrical box on the switch was for the signals on the GTW line, as well as a signal that was on the connecting track.
The the derail at St Marys had a lockout device controled by the operator at the plant.
The derail at Meijer also had a twin inside the fence at Delphi. They were interlocked with the overhead doors in the buildings.
Re: Kinney Spur and Penn Junction
I'm curious where you got your speculative information about the wye. A wye would have made sense as the old D&M line was still used at least as far as Coopersville after the GTW acquired rights over the PRR to Muskegon. FYI, 1957 aerial imagery (http://historicaerials.com/) isn't the best but it looks like the siding might still be there. The siding shows up on topo maps as late as 1980.EWRice wrote:I think I found my answers. The grade was built on speculation and no tracks were ever laid. The siding shown on the map was the interchange track between GTW and GR&I/Pen. I was told it was pulled around '57, give or take a year.
EWRice, thanks for your recent post. I hadn't seen the photos posted by mikerm19 back in 2010.
Does anyone know when the last train was run between Coopersville and Grand Haven? As I understand it, the line was pretty much abandoned in place some time after the ferry service was moved to Muskegon and rights were acquired over the PRR.
Re: Kinney Spur and Penn Junction
From the History Line at MichiganRailroads.com,
GTW is authorized to abandon the Grand Rapids subdivision from Marne to Grand Haven. The line has not been used for some time due to lack of traffic. [IT-4/1976].
aghudley wrote:Does anyone know when the last train was run between Coopersville and Grand Haven? As I understand it, the line was pretty much abandoned in place some time after the ferry service was moved to Muskegon and rights were acquired over the PRR.
PatC created a monster, 'cause nobody wants to see Don Simon no more they want AARR I'm chopped liver, well if you want AARR this is what I'll give ya, bad humor mixed with irrelevant info that'll make you roll your eyes quicker than a ~Z~ banhammer...
Re: Kinney Spur and Penn Junction
I know people that remember locomotives pulling up behind the Idle Hour restaurant in Spring Lake so the crew could get breakfast. I believe this would have been in the 1960's or 1970's.
- Schteinkuh
- Railcam Terrorizer
- Posts: 686
- Joined: Sun Oct 16, 2011 4:06 pm
- Location: LansingRailFan’s Mom’s House
Re: Kinney Spur and Penn Junction
IIRC last train was the local job that was left in 1976.
According to all known laws of aviation, there is no way a bee should be able to fly. Its wings are too small to get its fat little body off the ground. The bee, of course, flies anyway because bees don't care what humans think is impossible.
- trnwatcher
- My name ain't Steven
- Posts: 4855
- Joined: Sun May 11, 2008 6:22 pm
- Location: Grandville MI
- Contact:
Re: Kinney Spur and Penn Junction
The last "scheduled" train was probably in the late 70's but I read somewhere that GTW ran the last train from Grand Haven in the early 80's when they cleaned all the storage cars out of the yard there.
Steven F. Shick
http://www.youtube.com/user/trnwatcher
http://www.trnwatcher.net
I.T. guy/Railfan
"The true railfan has two favorite railroads....the Baltimore & Ohio and another one." - Charles S. Roberts
http://www.youtube.com/user/trnwatcher
http://www.trnwatcher.net
I.T. guy/Railfan
"The true railfan has two favorite railroads....the Baltimore & Ohio and another one." - Charles S. Roberts
-
- Roadmaster
- Posts: 4753
- Joined: Fri Dec 23, 2005 9:12 am
- Location: Grand Rapids, MI
Re: Kinney Spur and Penn Junction
The story goes the track was pulled up from Grand Haven towards Marne in 1976. When they got east of the GM plant, GM said "we have a switch maintenance agreement". The track was relaid back to the plant - without tie plates . The plate-less rail is still there.
The radius for the short wye leg is shown on the val map. No other info on the map.
The radius for the short wye leg is shown on the val map. No other info on the map.
- Schteinkuh
- Railcam Terrorizer
- Posts: 686
- Joined: Sun Oct 16, 2011 4:06 pm
- Location: LansingRailFan’s Mom’s House
Re: Kinney Spur and Penn Junction
So they had them relay the track even though there was no chance of future business?Raildudes dad wrote:The story goes the track was pulled up from Grand Haven towards Marne in 1976. When they got east of the GM plant, GM said "we have a switch maintenance agreement". The track was relaid back to the plant - without tie plates . The plate-less rail is still there.
The radius for the short wye leg is shown on the val map. No other info on the map.
According to all known laws of aviation, there is no way a bee should be able to fly. Its wings are too small to get its fat little body off the ground. The bee, of course, flies anyway because bees don't care what humans think is impossible.
- amtrak1007
- MP 25 Productions Co-Founder
- Posts: 2978
- Joined: Wed Apr 12, 2006 12:55 am
- Location: Fisher FB97
- Contact:
Re: Kinney Spur and Penn Junction
The track was installed for bargaining tools against the teamsters union, so to keep using it as bargaining, you need to have the switch connected no?AMTK55 wrote:So they had them relay the track even though there was no chance of future business?Raildudes dad wrote:The story goes the track was pulled up from Grand Haven towards Marne in 1976. When they got east of the GM plant, GM said "we have a switch maintenance agreement". The track was relaid back to the plant - without tie plates . The plate-less rail is still there.
The radius for the short wye leg is shown on the val map. No other info on the map.
- Ben Higdon
- Railroadfan...fan
- Posts: 844
- Joined: Wed Jan 25, 2006 2:02 pm
Re: Kinney Spur and Penn Junction
The Grand Haven car ferry slip was kept functional for a period of time as a back up for Muskegon. Considering there was only one slip in Muskegon, GTW may have thought it worthwhile to have that wye connection in place to streamline movements between the regular base of operation in Muskegon and the back up slip at Grand Haven (assuming they would not just run the road trains in/out of Grand Haven). I've not heard of evidence the wye was ever built but it may have been there for a time when the connection was first built from Penn Jct to the PRR.
- MQT1223
- O Scale Railfanner
- Posts: 4092
- Joined: Wed Sep 10, 2014 1:46 pm
- Location: Grandville, Michigan
- Contact:
Re: Kinney Spur and Penn Junction
This might be a stupid question, but why was the bridge at Penn Jct. left in place but partially filled? Was the fact that the line from GR to GH wasn't used that much at the time and that the GT didn't see the point in removing the bridge all together?
Penn Jct. was removed in the 50's per someone's post, so I'm guessing I-96 came way later? North of the bridge was left in until the 80's, but south of the bridge to GR came out when?
Penn Jct. was removed in the 50's per someone's post, so I'm guessing I-96 came way later? North of the bridge was left in until the 80's, but south of the bridge to GR came out when?
1223 OUT! President and Founder of the Buck Creek Central, the Rolling River Route! (2012-2017) President and Founder of the Lamberton Valley Railroad, The Tin Plate Road! Proudly railfanning with Asperger's since 1996.