RailRoadFan.com

Tom, E800 should have CN 5774, BNSF 9842.

Thank you Justin, those 2 engines along with the BNSF 5749 & 9053 were spotted on the rear of Q326 at Pullman mp CG48 on Dec 8th & E800 early this morning had all 4 of those engines on its head end & had dropped off BNSF 5749 & 9053 into Grand Junction.

justin_gram wrote:Bob, looks like 326 had CSXT 29 + 8048 lead.

Thanks Justin? This mornings Q32909 by Howell at 08:33 with two UP units, 8345+7993 with 44 cars. Overnight, another grain empty went west, this one to Webberville, V81008 with CSX 3197+5302 and 91 cars.

BL2-1843 wrote:

justin_gram wrote:Bob, looks like 326 had CSXT 29 + 8048 lead.

Thanks Justin? This mornings Q32909 by Howell at 08:33 with two UP units, 8345+7993 with 44 cars. Overnight, another grain empty went west, this one to Webberville, V81008 with CSX 3197+5302 and 91 cars.

329 clear sunfield 1055

Q326 arrived at Bangor mp CG60.7 with 2 CSX engines - couldn't read their numbers & as of late, reception for the CSX calls is terrible from mp CG33 to mp CG70.2

Q327 stopped in Grandville. Had to throw the switch manually. UP power leading with an Ace on point.

Edit**

3 crossings are not working in Grandville and crews are at Broadway Ave.

Tom49801 wrote:Q326 arrived at Bangor mp CG60.7 with 2 CSX engines - couldn't read their numbers & as of late, reception for the CSX calls is terrible from mp CG33 to mp CG70.2

Story of my life. Yesterday's, Q326 goes by at noon in the middle of the day when I am out of town, today it goes by at 19:00 after dark when the numbers are unreadable, and the signal calls are unhearable. Never saw a thing of Q328 in Howell today.

Broken Rail in Grandville is delaying 327

Edit**

Broken rail is in the Broadway Avenue Crossing. Workers are currently removing the rubber crossing material in the road.

Q326 had gone thru Pullman mile post CG48 @ 19:43:34 with 2 BNSF pushers it had picked up at Grand Junction mile post CG53.9 & has since gone over the Defect Detector at mp CG19.1 around 20:48hrs

Second grain empty of the day, this one V77806 passed by Howell at 20:55 with CSX 7794 and 90 cars of various assortment lease cars. With this mornings empty loading at Webberville, and Saturdays empty loading at Grand Ledge, not sure where this one will wind up yet. Train currently approaching Williamston.

Q32609 had CSX 920 for a leader.

Q327 arrived at Pullman mile post CG48 @ 22:30:38 with UP #8345 in the lead & a 2nd UP engine.

Q327 arrived Bangor mile post CG60.7 @ 22:47:20

Today's Q326 had 110 cars. Tonight's Q327 ad 92 cars. Thanks Bang-cam!

q32809 not on duty grand rapids. q32810 still set to run 3am tomorrow.
q32709 gross MI MP 63
n80009, n80010, n80107 in system,. n80108 on duty chicago.
e80007 on duty west olive.
amtrak p37009 waverly holland.
q50809 stark MP 31. q50910 on duty 4am detroit.
d73509 wixom MI. D73609 middlebelt detroit.

I heard a Westbound going through Woodbury at about 22:40 or so. Currently ATCS shows they didn't stop at Lake O and are approaching Elmdale. Lined on the main to the WE of Fox right now.

Tom49801 wrote:Q327 arrived at Pullman mile post CG48 @ 22:30:38 with UP #8345 in the lead & a 2nd UP engine.

Q327 arrived Bangor mile post CG60.7 @ 22:47:20

Currently going through St. Joseph.

Loaded BNSF coal train arrived Bangor mp CG60.7 at 06:26 then went into Grand Junction siding mp CG55.6 to let Amtrak by & picked up 4 pusher engines while in Grand Junction the CSX 920 & CSX # I couldn't read, and 2 BNSF engines 5749 & 9053.

This coal train was passing thru Pullman mp CG48 at 09:09

Q32810 went east by Howell at 07:18 with CSX 29+8446+4035 and 69 cars. Q32910 not called in Detroit until 11:15.

BNSF 9302, 5897 north at Riley St. Holland 10:12 AM. CSX 920,3164, BNSF 5749, 9053 pushing.

Loaded West Olive Coal Train EB @ St. Joseph @ 1:15pm

BNSF 9053, 5749, CSX 3164, 920 light power south at Riley St. Holland 2:15 PM.