CSX Train Location Updates - November 2021

[NS3322]

Is N801-25 still at Grand Jct.?

[SD80MAC]

Y106 west by CH 146 at 12:38 with 4016 and 7 cars, 4 boxes from Advance and 3 gons from Beacon.

[MQT1223]

Is N801-25 still at Grand Jct.?

I’m gonna go out on a limb and say yes, since Tom hasn’t posted an update on it and he’s pretty much on top of things down here

[trnwatcher]

Is N801-25 still at Grand Jct.?

I’m gonna go out on a limb and say yes, since Tom hasn’t posted an update on it and he’s pretty much on top of things down here

Field report reported the GTW HU at Grand Jct at 1100 edt this AM.

[Tom49801]

D706 east by CH 146 at 11:47. Looked like 5340 with 47 trailing.

D706-01 @ 12:30 eastward reported by DD mp CH126.3 w/ 328 axles. CSX engines #5340 + #47 & 79 cars (26 loads + 53 empties). He has work for Lansing.

[Tom49801]

D706-01 @ 13:12 eastward was reported by the DD mp CH104.3 with 328 axles & 4,388 feet long. CSX engines #5340 + #47 & 79 cars.

[Tom49801]

Is N801-25 still at Grand Jct.?

Yes he is as of 2:36pm eastern time.

[Tom49801]

Q326-01 @ 16:25 eastward reported by the DD mp CG91.9 with 320 axles & 4,514 feet long. CSX engine #7004 + 1 & 77 cars.

Also at this time, N801 with the rear CN #8952 engine is still tied down inside Grand Junction mp CG54.

[Tom49801]

Q326-01 @ 17:29:12 eastward Bangor's Division St crossing mp CG60.93 with CSX engine #7004 + mid CSX engine #917 & 77 total cars.

[Tom49801]

Q326-01 @ 17:58 eastward reported by the DD mp CG44.2 with 320 axles & 4,602 feet long. CSX engine #7004 + mid CSX engine #917 & 77 cars.

[Tom49801]

Q326-01 @ 18:54 eastward reported by the DD mp CG19.1 with 320 axles & 4,538 feet long. CSX engine #7004 + mid CSX engine #917 & 77 cars.

Also at this time, there is a D crew getting the N801-25 with the rear CN #8952 engine ready for departure from Grand Junction siding mp CG54. Very early this morning, the D801-31crew had added the CSX power (#3167 + #3440) to the head end behind the leading engine BNSF #9029 & they had cut the train for the crossing there.

[Tom49801]

Is N801-25 still at Grand Jct.?

D801-01 @ 19:26 copied their EC1 to depart Grand Jct siding mp CG54 & head eastward with BNSF engine #9029 + CSX engines #3167 + #3440 & 130 loaded coal cars & rear dpu CN #8952 (GTW Heritage Unit). This was N801-25 that had tied down there yesterday.

[niffirgppank]

Is N801-25 still at Grand Jct.?

D801-01 @ 19:26 copied their EC1 to depart Grand Jct siding mp CG54 & head eastward with BNSF engine #9029 + CSX engines #3167 + #3440 & 130 loaded coal cars & rear dpu CN #8952 (GTW Heritage Unit).

Is it on the move yet or is it still sitting in grand junction then? Or will it depart shortly?

[Tom49801]

Is N801-25 still at Grand Jct.?

D801-01 @ 19:26 copied their EC1 to depart Grand Jct siding mp CG54 & head eastward with BNSF engine #9029 + CSX engines #3167 + #3440 & 130 loaded coal cars & rear dpu CN #8952 (GTW Heritage Unit).

Is it on the move yet or is it still sitting in grand junction then? Or will it depart shortly?

He's on the move & reported from mp CG46 @ 19:53

D801-01 @ 19:58 eastward reported by the DD mp CG44.2 with 544 axles & 7,320 feet long. BNSF engine #9029 + CSX engines #3167 + #3440 & 130 loaded coal cars & rear dpu CN #8952 (GTW Heritage Unit).

[NS3322]

D801-01 @ 19:26 copied their EC1 to depart Grand Jct siding mp CG54 & head eastward with BNSF engine #9029 + CSX engines #3167 + #3440 & 130 loaded coal cars & rear dpu CN #8952 (GTW Heritage Unit).

Is it on the move yet or is it still sitting in grand junction then? Or will it depart shortly?

He's on the move & reported from mp CG46 @ 19:53

D801-01 @ 19:58 eastward reported by the DD mp CG44.2 with 544 axles & 7,320 feet long. BNSF engine #9029 + CSX engines #3167 + #3440 & 130 loaded coal cars & rear dpu CN #8952 (GTW Heritage Unit).

I appreciate the updates! I unfortunately was unable to get over there today. I will try again whenever it comes back.

[Tom49801]

D801-01 @ 20:42 eastward Holland Depot mp CG25.3 with BNSF engine #9029 + CSX engines #3167 + #3440 & 130 loaded coal cars & rear dpu CN #8952 (GTW Heritage Unit).

He cleared the Holland Depot at 20:52 with the CN #8952 having a flashing EOT. That was seen, too, when he had gone by the Bangor live cam as N801-25 & I have no idea why he has an EOT. The CN's headlight was working & dimmed as it should be when on the rear of the train.

[Tom49801]

Is it on the move yet or is it still sitting in grand junction then? Or will it depart shortly?

He's on the move & reported from mp CG46 @ 19:53

D801-01 @ 19:58 eastward reported by the DD mp CG44.2 with 544 axles & 7,320 feet long. BNSF engine #9029 + CSX engines #3167 + #3440 & 130 loaded coal cars & rear dpu CN #8952 (GTW Heritage Unit).

I appreciate the updates! I unfortunately was unable to get over there today. I will try again whenever it comes back.

Will keep tabs on his return trip, don't know when that'll be, could be tomorrow, could be in 2 days, just never know. Where will you try to see him at?

[Tom49801]

Amtrak P370-01 @ 21:22 eastward reported by the DD mp CG91.9 with 16 axles & 305 feet long. IDTX engine #4619 & 3 SuperLiners.

[ns8401]

Q132 North by Romulus at 927pm
UP 8408 SD70AH
KCSM 4540 AC44CW Grey
138 Cars long count

[ns8401]

D936 South by Romulus at 954pm
CSX 835 ES44AC
LSRC 6355 SD50-2
53 Cars