CSX Train Location Updates: June, 2020.
- ~Z~
- Sofa King Admin
- Posts: 12945
- Joined: Tue Oct 12, 2004 2:14 pm
- Location: Grand Rapids, MI
- Contact:
Re: CSX Train Location Updates: June, 2020.
Per Bangor chat: e80123 supposedly on duty up at west olive. Not aware of any coal empties tied down elsewhere on the Grand Rapids sub, so i'd expect it to depart west olive. N80028/E80027 in da system.
Webmaster
Railroad photos on Railroadfan.com
Railroad photos on Railroadfan.com
- Tom49801
- Bangor Webcam Master
- Posts: 23522
- Joined: Sat Oct 06, 2018 9:17 am
- Location: Prince Frederick, Maryland
Re: CSX Train Location Updates: June, 2020.
E801-23 @ 6:54pm entering the Grand Rapids sub-div. at mp CG25.3 with BNSF engines #9006 + #5927. A viewer at Holland reported these engines are light.
Q326-27 @ 7:03pm reported by the DD at mp CG19.1 with 364 axles & 4,851 feet long. CSX engines #5271 + #990 + #4441 & 87 cars - no Wavely/Holland stops made.
E801-23 @ 8:03:22pm Bangor's Center Street crossing mp CG60.35 with BNSF engines #9006 + #5927 lite. No idea where he's headed, he reported from Paw Paw mp CG85 at 8:55pm
E801-23 @ 9:08pm has reversed direction to head eastward reporting from Grey mp CG82.8 Someone had posted earlier in Bangor there are empty coal cars tied down in Riverside mp CG80.1
D802-27 @ 9:35pm westward at Holland mp CG25.3 with CSX engines #3266 + #3209 I think they are traveling lite.
D802-27 @ 10:11pm westward reported by the DD at mp CG44.2 with 12 axles. CSX engines #3266 + #3209 lite.
Q326-27 @ 7:03pm reported by the DD at mp CG19.1 with 364 axles & 4,851 feet long. CSX engines #5271 + #990 + #4441 & 87 cars - no Wavely/Holland stops made.
E801-23 @ 8:03:22pm Bangor's Center Street crossing mp CG60.35 with BNSF engines #9006 + #5927 lite. No idea where he's headed, he reported from Paw Paw mp CG85 at 8:55pm
E801-23 @ 9:08pm has reversed direction to head eastward reporting from Grey mp CG82.8 Someone had posted earlier in Bangor there are empty coal cars tied down in Riverside mp CG80.1
D802-27 @ 9:35pm westward at Holland mp CG25.3 with CSX engines #3266 + #3209 I think they are traveling lite.
D802-27 @ 10:11pm westward reported by the DD at mp CG44.2 with 12 axles. CSX engines #3266 + #3209 lite.
Last edited by Tom49801 on Sat Jun 27, 2020 11:24 pm, edited 3 times in total.
Bangor Live Rail Cam https://www.youtube.com/watch?v=FCsCPLZljMs
Re: CSX Train Location Updates: June, 2020.
There was a set of coal cars earlier today between Gray and Riverside.
I didn't see any power on them.Jeff O.
Celebrating 11 years dial-up free!
(18:36:45) MagnumForce: Railfanning is way more fun when you stop caring about locomotives and signals
(19:11:29) cbehr91: I can't believe I'm +1ing Brent but +1
Celebrating 11 years dial-up free!
(18:36:45) MagnumForce: Railfanning is way more fun when you stop caring about locomotives and signals
(19:11:29) cbehr91: I can't believe I'm +1ing Brent but +1
- Tom49801
- Bangor Webcam Master
- Posts: 23522
- Joined: Sat Oct 06, 2018 9:17 am
- Location: Prince Frederick, Maryland
Re: CSX Train Location Updates: June, 2020.
D802-27 @ 10:53:26pm westward Bangor's W. Monroe St crossing mp CG60.72 with CSX engines #3266 + #3209 lite. Don't know where they're headed.
D802-27 @ 11:27pm reported from Riverside mp CG80.1 & is headed to Sawyer mp CG106.4 to pick up the loaded coal train that was tied down there. This is the other half of the doubled up coal train N801-19 that was split up at Sawyer & tied down there on June 25th.
D802-27 @ 11:46pm reported clear of the St Joseph Bridge with CSX engines #3266 + #3209 lite.
E801-23 @ 11:47pm reported by the DD at mp CG91.9 with 532 axles. BNSF engines #9006 + #5927 & 130 empty coal cars.
D802-27 @ 11:27pm reported from Riverside mp CG80.1 & is headed to Sawyer mp CG106.4 to pick up the loaded coal train that was tied down there. This is the other half of the doubled up coal train N801-19 that was split up at Sawyer & tied down there on June 25th.
D802-27 @ 11:46pm reported clear of the St Joseph Bridge with CSX engines #3266 + #3209 lite.
E801-23 @ 11:47pm reported by the DD at mp CG91.9 with 532 axles. BNSF engines #9006 + #5927 & 130 empty coal cars.
Bangor Live Rail Cam https://www.youtube.com/watch?v=FCsCPLZljMs
Re: CSX Train Location Updates: June, 2020.
D802-27 is currently going through St. Joseph eastbound. Sounds like BNSF 6068 leading.
Jeff O.
Celebrating 11 years dial-up free!
(18:36:45) MagnumForce: Railfanning is way more fun when you stop caring about locomotives and signals
(19:11:29) cbehr91: I can't believe I'm +1ing Brent but +1
Celebrating 11 years dial-up free!
(18:36:45) MagnumForce: Railfanning is way more fun when you stop caring about locomotives and signals
(19:11:29) cbehr91: I can't believe I'm +1ing Brent but +1
Re: CSX Train Location Updates: June, 2020.
Currently going through McDonald.Jochs wrote:D802-27 is currently going through St. Joseph eastbound. Sounds like BNSF 6068 leading.
Jeff O.
Celebrating 11 years dial-up free!
(18:36:45) MagnumForce: Railfanning is way more fun when you stop caring about locomotives and signals
(19:11:29) cbehr91: I can't believe I'm +1ing Brent but +1
Celebrating 11 years dial-up free!
(18:36:45) MagnumForce: Railfanning is way more fun when you stop caring about locomotives and signals
(19:11:29) cbehr91: I can't believe I'm +1ing Brent but +1
-
- Owner of Donnieland's Outpost
- Posts: 2533
- Joined: Mon Jun 19, 2006 9:09 pm
- Location: lyn dore meadows condo's
Re: CSX Train Location Updates: June, 2020.
early 327 - no work waverly
clear 112th at 301am 680 axles - 3 motors from sat's 326 - 166 cars 9912'
320a at bangor eb loads for west oliva - 2 bnsf headend power , with 2 cxs motors on rear of train
thinking 327 met the loads at wells - looking at the timeline for the loads and 327 at Holland and bangor
327 by bangor cam at 530a
note
the lead and mid motor were 6 axles, but it looked like a 4 axle was the 3 motor - which would make
the axle count of 680 correct for the total of engines and cars
clear 112th at 301am 680 axles - 3 motors from sat's 326 - 166 cars 9912'
320a at bangor eb loads for west oliva - 2 bnsf headend power , with 2 cxs motors on rear of train
thinking 327 met the loads at wells - looking at the timeline for the loads and 327 at Holland and bangor
327 by bangor cam at 530a
note
the lead and mid motor were 6 axles, but it looked like a 4 axle was the 3 motor - which would make
the axle count of 680 correct for the total of engines and cars
don baxter
- Tom49801
- Bangor Webcam Master
- Posts: 23522
- Joined: Sat Oct 06, 2018 9:17 am
- Location: Prince Frederick, Maryland
Re: CSX Train Location Updates: June, 2020.
D802-27 was on the Bangor cam mp CG60.72 @ 03:20:40am with BNSF engines #6068 + 1 & 130 loaded coal cars & CSX pushers #3266 + #3209.donnieland wrote:early 327 - no work waverly
clear 112th at 301am 680 axles - 3 motors from sat's 326 - 166 cars 9912'
320a at bangor eb loads for west oliva - 2 bnsf headend power , with 2 cxs motors on rear of train
thinking 327 met the loads at wells - looking at the timeline for the loads and 327 at Holland and bangor
327 by bangor cam at 530a
note
the lead and mid motor were 6 axles, but it looked like a 4 axle was the 3 motor - which would make
the axle count of 680 correct for the total of engines and cars
Q327-28 was on the Bangor cam mp CG60.72 @ 05:30:28am with CSX engines #990 + #5271 + a 4 axle CSX that was blurry to read - kind of looked like it was #6055 or #6555 & 166 cars. The 4 axle engine on yesterday's Q326 was the CSX #4441. On June 22nd, Q326 had CSX engine #6055 in its consist.
Q327-28 was reported by the DD at mp CG131.3 @ 08:03am
Bangor Live Rail Cam https://www.youtube.com/watch?v=FCsCPLZljMs
- Tom49801
- Bangor Webcam Master
- Posts: 23522
- Joined: Sat Oct 06, 2018 9:17 am
- Location: Prince Frederick, Maryland
Re: CSX Train Location Updates: June, 2020.
Q326-28 @ 1:37pm reported by the dispatcher to a Hi-Railer Q326 is at Sawyer mp CG105.6 & about 45 minutes from Riverside mp CG80.1
Q326-28 @ 2:09pm reported clear of the St Joseph Bridge with CSX engine #3086 leading. He had advised dispatch he has 27 cars to set off at Waverly & dispatch advised him he may have to wait at the east end of Gross siding mp CG61.3 for the tie gang to clear up.
Q326-28 @ 3:51:06pm at Bangor's Division St crossing mp CG60.93 with CSX engine #3086 & 112 cars & CSX #3068 rear DPU. No delay at Gross today.
Q326-28 @ 4:53pm got the ok to proceed through the work zone at mp CG55.7 after being held just west of Grand Junction because of the tie work going on.
N800-28 @ 5:07pm cleared the St Joseph Bridge. BNSF engines #5874 + #9220(?). He will be tying down in Wells Siding mp CG43.3
Q326-28 @ 2:09pm reported clear of the St Joseph Bridge with CSX engine #3086 leading. He had advised dispatch he has 27 cars to set off at Waverly & dispatch advised him he may have to wait at the east end of Gross siding mp CG61.3 for the tie gang to clear up.
Q326-28 @ 3:51:06pm at Bangor's Division St crossing mp CG60.93 with CSX engine #3086 & 112 cars & CSX #3068 rear DPU. No delay at Gross today.
Q326-28 @ 4:53pm got the ok to proceed through the work zone at mp CG55.7 after being held just west of Grand Junction because of the tie work going on.
N800-28 @ 5:07pm cleared the St Joseph Bridge. BNSF engines #5874 + #9220(?). He will be tying down in Wells Siding mp CG43.3
Bangor Live Rail Cam https://www.youtube.com/watch?v=FCsCPLZljMs
Re: CSX Train Location Updates: June, 2020.
N800-28 is currently going through Riverside. BNSF 5874 leading. They are going to tie the train down at Wells.
Last edited by Jochs on Sun Jun 28, 2020 5:37 pm, edited 1 time in total.
Jeff O.
Celebrating 11 years dial-up free!
(18:36:45) MagnumForce: Railfanning is way more fun when you stop caring about locomotives and signals
(19:11:29) cbehr91: I can't believe I'm +1ing Brent but +1
Celebrating 11 years dial-up free!
(18:36:45) MagnumForce: Railfanning is way more fun when you stop caring about locomotives and signals
(19:11:29) cbehr91: I can't believe I'm +1ing Brent but +1
- SW
- Rail Trail Explorer
- Posts: 11082
- Joined: Tue Jul 05, 2005 10:51 pm
- Location: Owosso, MI - 1 mile north of the GLC
Re: CSX Train Location Updates: June, 2020.
SB grain train just cleared 7 Mile Rd. CSX 521 + 266 + 90 cars.
Owosso Steve
- Tom49801
- Bangor Webcam Master
- Posts: 23522
- Joined: Sat Oct 06, 2018 9:17 am
- Location: Prince Frederick, Maryland
Re: CSX Train Location Updates: June, 2020.
Q326-28 @ 6:07pm got the ok to proceed past the signal at the east end of Grand Junction mp CG53.9 This is the 2nd time in the Grand Junction area he had to stop due to the tie renewal work in that area. On the move @ 6:20pm
N800-28 @ 6:13pm reported by the DD mp CG66.2 with 528 axles & 6,963 feet long BNSF engines #5874 + #9220 & 129 cars.
N800-28 @ 6:21pm at Bangor's Division St crossing mp CG60.93 He'll be going into & tying down in Wells Siding mp CG43.3
Q326-28 @ 7:35pm reported from mp CG36, slow progress for him tonight.
N800-28 @ 7:52pm received the ok to proceed thru the work limits eastward mp CG54.0
N800-28 @ 6:13pm reported by the DD mp CG66.2 with 528 axles & 6,963 feet long BNSF engines #5874 + #9220 & 129 cars.
N800-28 @ 6:21pm at Bangor's Division St crossing mp CG60.93 He'll be going into & tying down in Wells Siding mp CG43.3
Q326-28 @ 7:35pm reported from mp CG36, slow progress for him tonight.
N800-28 @ 7:52pm received the ok to proceed thru the work limits eastward mp CG54.0
Bangor Live Rail Cam https://www.youtube.com/watch?v=FCsCPLZljMs
Re: CSX Train Location Updates: June, 2020.
Q630 by Plymouth. CSXT 5371 and UP 5470.
Re: CSX Train Location Updates: June, 2020.
D735 South at Plymouth. CSXT 536 and 113. Recrewing at Sterns Road.
D716 returning to Plymouth from Romulus. CSXT 2752.
Q201 is also departing from Rougemere. CSXT 3126 and 3150.
D716 returning to Plymouth from Romulus. CSXT 2752.
Q201 is also departing from Rougemere. CSXT 3126 and 3150.
- Tom49801
- Bangor Webcam Master
- Posts: 23522
- Joined: Sat Oct 06, 2018 9:17 am
- Location: Prince Frederick, Maryland
Re: CSX Train Location Updates: June, 2020.
D801-28/Q326-28 @ 11:00pm eastward reported by the DD at mp CG19.1 with 460 axles & 6,358 feet long. CSX engine #3086 & 112 cars & CSX #3068 rear DPU. The crew for Q326 had ran out of time at Waverly & was supposed to have dropped off 27 cars there. D801 is taking the train to Grand Rapids.
Bangor Live Rail Cam https://www.youtube.com/watch?v=FCsCPLZljMs
- trnwatcher
- My name ain't Steven
- Posts: 4855
- Joined: Sun May 11, 2008 6:22 pm
- Location: Grandville MI
- Contact:
Re: CSX Train Location Updates: June, 2020.
11:35 EDT D801 RESTRICTING LAMAR. D700 CLEAR ON A PAIR AT GRAND JUNCTION.
Steven F. Shick
http://www.youtube.com/user/trnwatcher
http://www.trnwatcher.net
I.T. guy/Railfan
"The true railfan has two favorite railroads....the Baltimore & Ohio and another one." - Charles S. Roberts
http://www.youtube.com/user/trnwatcher
http://www.trnwatcher.net
I.T. guy/Railfan
"The true railfan has two favorite railroads....the Baltimore & Ohio and another one." - Charles S. Roberts
- Tom49801
- Bangor Webcam Master
- Posts: 23522
- Joined: Sat Oct 06, 2018 9:17 am
- Location: Prince Frederick, Maryland
Re: CSX Train Location Updates: June, 2020.
D700-28 @ 11:32pm westward reported by the DD mp CG44.2 with 16 axles & 216 feet long. CSX #6987 + #2387 (slug set) & 2 cars. (He had called out by Grand Junction prior to the DD44.2 report when he was actually by Wells)
Bangor Live Rail Cam https://www.youtube.com/watch?v=FCsCPLZljMs
- Tom49801
- Bangor Webcam Master
- Posts: 23522
- Joined: Sat Oct 06, 2018 9:17 am
- Location: Prince Frederick, Maryland
Re: CSX Train Location Updates: June, 2020.
D700-28 @ 12:11:20am westward Bangor's Center St crossing mp CG60.35 with CSX #6987 + #2387 (slug set) & 2 box cars.
Last edited by Tom49801 on Mon Jun 29, 2020 9:30 am, edited 1 time in total.
Bangor Live Rail Cam https://www.youtube.com/watch?v=FCsCPLZljMs
Re: CSX Train Location Updates: June, 2020.
D700-28 is currently working at Hartford.
Jeff O.
Celebrating 11 years dial-up free!
(18:36:45) MagnumForce: Railfanning is way more fun when you stop caring about locomotives and signals
(19:11:29) cbehr91: I can't believe I'm +1ing Brent but +1
Celebrating 11 years dial-up free!
(18:36:45) MagnumForce: Railfanning is way more fun when you stop caring about locomotives and signals
(19:11:29) cbehr91: I can't believe I'm +1ing Brent but +1
-
- Railroadfan...fan
- Posts: 29
- Joined: Mon Jun 01, 2020 9:00 am
- Location: Saint Joseph, Michigan
Re: CSX Train Location Updates: June, 2020.
Q327-29 @7:29AM reported at MP CG46.2 with DD44.2 report being no defects 636 axles 8305 feet CSX 3068 + 1 leading and 156 cars