New Control Point CP Indy at MP B501.5

Anything pertaining to railfanning in Indiana.

Re: New Control Point CP Indy at MP B501.5

Unread postby LakeATCS » Tue Feb 26, 2019 10:57 pm

Burnham is waiting on the NICTD.

Should get a South Shore view out of it, and with their Gauntlet tracks, that should be Hilarious to try and get ATCS to deal with.
LakeATCS
Railroadfan...fan
 
Posts: 613
Joined: Sat Feb 28, 2015 6:37 am

Re: New Control Point CP Indy at MP B501.5

Unread postby LakeATCS » Wed May 08, 2019 11:16 am

It looks like Burnham might have gotten the long put off update.
LakeATCS
Railroadfan...fan
 
Posts: 613
Joined: Sat Feb 28, 2015 6:37 am

Re: New Control Point CP Indy at MP B501.5

Unread postby LakeATCS » Wed May 08, 2019 12:28 pm

http://southshore.etaspot.net/

If you need help figuring out which say the south shore trains are going.

Doesn't show freights. But it should give you a big head start
LakeATCS
Railroadfan...fan
 
Posts: 613
Joined: Sat Feb 28, 2015 6:37 am

Re: New Control Point CP Indy at MP B501.5

Unread postby LakeATCS » Wed May 08, 2019 4:11 pm

Looks like on the CSS&SB side we can see the four signals, the two OS circuits, a request for each track, and an ack for each request.

No approach circuits or views of the dang gauntlet tracks. Probably for the better, they would have been a nightmare.
LakeATCS
Railroadfan...fan
 
Posts: 613
Joined: Sat Feb 28, 2015 6:37 am

Re: New Control Point CP Indy at MP B501.5

Unread postby justalurker66 » Wed May 08, 2019 8:40 pm

Does NICTD control the diamond? Or is it NS Chicago District's interlocking with NICTD asking for permission to pass through?

It would be interesting to see how this interlocks with NICTD's CTC. It sounds like NICTD sets the route (including their own switch settings) and requests a clear signal. NS acknowledges the signal request and grants a clear signal. Once NICTD gets the clear their signals are set accordingly.

All the gauntlet stuff is irrelevant to NS. I'd like to see how NICTD displays the gauntlet, but it isn't a place where trains can be on both the main and the gauntlet at the same time.
User avatar
justalurker66
Railroadfan...fan
 
Posts: 1398
Joined: Tue Feb 15, 2011 3:51 am

Re: New Control Point CP Indy at MP B501.5

Unread postby 9xs » Fri May 10, 2019 8:41 pm

also looks like the bit patterns were rearranged, train 11 the express and the one following it went trough 5he diamond, showing cross traffic occupied on it. An NS train was on the track immediately to the south, but no track there showed occupied.
9xs
Railroadfan...fan
 
Posts: 333
Joined: Thu Jan 07, 2016 11:37 pm

Re: New Control Point CP Indy at MP B501.5

Unread postby tttodisp » Sat May 11, 2019 5:31 pm

I have posted the updated kit for the NS Chicago District, but I still have not been able to figure out the data in terms of ATCS handling, as the bit patterns are not normal for train movements. If anyone has suggestions, I would like to see them.

Has anyone been by 110th Street recently? I wonder if new signals are mounted, as the signal data is still very old.
tttodisp
Railroadfan...fan
 
Posts: 188
Joined: Sun Nov 30, 2014 9:13 pm

Re: New Control Point CP Indy at MP B501.5

Unread postby justalurker66 » Sun May 12, 2019 8:03 pm

The Chicago District movements look good. I have not seen anything on the diamond track, but that shouldn't be too hard. Direction is usually difficult at a diamond, but you have Calumet Park close by.

The two NICTD tracks are CTC but normally each is run in one direction. Track 1 (5 on the layout) headed west and track 2 (6 on the layout) headed east. With the Hegeswich platforms within the interlocking I would not expect to see a train running against normal traffic.

Based on the codeline captured since midnight, it appears there are four bits in use for each NICTD track. Have you see the additional bits go active that are labeled in the kit? I noticed some duplicate names.

Here is the pattern I have seen:
Westbound Track 1: K72 Request for Track, K71 Request Granted, K64 NICTD Signal Cleared (5WGK allow train), K61 NICTD Train Present (5TK - K72,K71,K64 bits normally clear within a few seconds), K61 clears a few minutes later after the station stop.
Eastbound Track 2: K73 Request for Track, K65 Request Granted, K74 NICTD Signal Cleared (6EGK allow train), K62 NICTD Train Present (6TK - K73,K65,K74 bits normally clear within a few seconds), K62 clears a few minutes later after the station stop.
I see no evidence of approach circuits on NICTD, just the occupancy which coincides with station stop times.

Displaying on ATCS ... a challenge. I'd probably mark the approaches as dead track so they don't light up with the 5WGK and 6EGK signals (and stay lit since the approaches never occupy). If you have seen additional bits that you are sure are NICTD related that may provide 5EGK and 6WGK indications.
User avatar
justalurker66
Railroadfan...fan
 
Posts: 1398
Joined: Tue Feb 15, 2011 3:51 am

Re: New Control Point CP Indy at MP B501.5

Unread postby tttodisp » Sun May 12, 2019 8:19 pm

Thanks for the details. What is confusing to me is that a friend who had view-only access to the NS screen has watched the CSSB trains go through and they show the "normal" progress with approach indications on both sides as well as the TK (OS) section.
tttodisp
Railroadfan...fan
 
Posts: 188
Joined: Sun Nov 30, 2014 9:13 pm

Re: New Control Point CP Indy at MP B501.5

Unread postby justalurker66 » Sun May 12, 2019 10:45 pm

tttodisp wrote:Thanks for the details. What is confusing to me is that a friend who had view-only access to the NS screen has watched the CSSB trains go through and they show the "normal" progress with approach indications on both sides as well as the TK (OS) section.
Dispatch may be getting a better picture direct from NICTD on fiber. While we like it when railroads share their feeds over the air, NICTD has a dual fiber network (one group of cables buried, one group of cables aerial) along their entire ROW. They don't need radio or satellites to get information between locations or back to the dispatcher. (Excess fiber capacity is available for lease.)

Perhaps the minimal information we are seeing is intended as a backup in case the full information fails?
User avatar
justalurker66
Railroadfan...fan
 
Posts: 1398
Joined: Tue Feb 15, 2011 3:51 am

Re: New Control Point CP Indy at MP B501.5

Unread postby justalurker66 » Mon May 13, 2019 2:10 am

It looks like NICTD sent a westbound train on Track 2 just after 11pm CT ----

Westbound Track 2: K76 Request for Track, K75 Request Granted, K66 NICTD Signal Cleared (6WGK allow train), K62 NICTD Train Present (6TK - K76,K75,K66 bits cleared within a few seconds), K62 (6TK) cleared 2:49 later.

23:02:08=K76 {Request Track}
23:02:09=K76,K75 {Request Granted}

23:03:10=K76,K75,K66 {NICTD Signal Cleared 6WGK}

23:07:31=K76,K75,K66,6TK {Track Occupied}
23:07:37=K75,6TK
23:07:44=6TK

23:10:10={cleared}

[NOTE: THIS IS BASED ON ONE SEQUENCE. With the rarity of WB traffic on Track 2 we may see a second sequence, but I only saw this once in 24 hours of monitoring.]

BTW: I double checked the logs for K65 and K74. K65 (what I call Request Granted for Track 2 EB) goes active before K74 (6EGK) by 15 seconds or more. I only saw one occurrence on Sunday where K74 went active first.
User avatar
justalurker66
Railroadfan...fan
 
Posts: 1398
Joined: Tue Feb 15, 2011 3:51 am

Re: New Control Point CP Indy at MP B501.5

Unread postby justalurker66 » Mon May 13, 2019 3:42 am

And now it looks like NICTD sent an eastbound train on Track 1 just after 2am CT ----

Eastbound Track 2: K67 Request for Track, K71 Request Granted, K68 NICTD Signal Cleared (5EGK allow train), K61 NICTD Train Present (5TK - K67,K71,K68 bits cleared within a few seconds), K61 (5TK) cleared 86 seconds later.
burnham190512.PNG
burnham190512.PNG (2.02 KiB) Viewed 2143 times
User avatar
justalurker66
Railroadfan...fan
 
Posts: 1398
Joined: Tue Feb 15, 2011 3:51 am

Re: New Control Point CP Indy at MP B501.5

Unread postby LakeATCS » Mon May 13, 2019 10:01 am

The approach blocks seem to operate like the Amtrak line at Porter in that the approach bits seem to be one way and artificial conditions sent from the other signal system to the NS system.
LakeATCS
Railroadfan...fan
 
Posts: 613
Joined: Sat Feb 28, 2015 6:37 am

Re: New Control Point CP Indy at MP B501.5

Unread postby tttodisp » Mon May 13, 2019 11:04 am

I was just playing back some logs and I noticed that as soon as the TK's drop out for EB moves, the approach blocks at N State Line come on, so I am going to tie the east approach blocks at Burnham to AWA and BWA at N State Line.

Thanks for all of the help with decoding. I will hopefully upload a new version tonight.
tttodisp
Railroadfan...fan
 
Posts: 188
Joined: Sun Nov 30, 2014 9:13 pm

Previous

Return to Indiana Talk

Who is online

Users browsing this forum: No registered users and 3 guests

x