How to edit out crossing bell chimes?

Questions on editing, camera settings, equipment, critiques, how to upload photos, etc....
msurailfan
Railroadfan...fan
Posts: 138
Joined: Thu Jan 07, 2010 6:03 pm

How to edit out crossing bell chimes?

Unread post by msurailfan »

In a lot of today's youtube videos, photographers have been able to edit silent the chimes of crossing bells. I'm just going to be starting shooting video with my new 70D I received for Christmas, and I would like to do this but I'm not sure how to.

All my video editing will be taking place in Apple's iMovie. This, unfortunately, is the only program with which I can work at this time due to monetary constraints. Is anyone familiar with audio editing/clipping/whatever you call it in iMovie?

Or, does anyone have any other advice for me in this aspect?

TIA for any help.

Adam

User avatar
Ypsi
The Bestest Railroadfan... fan
Posts: 5510
Joined: Sun Feb 07, 2010 2:13 pm

Re: How to edit out crossing bell chimes?

Unread post by Ypsi »

Are you talking about the bell stopping after sounding for a couple seconds? Because if you are tere are many crossings where the bells only turn on when the gates are going down and sometimes up too. If you actually know they are editing out the bell, I'm not sure of that is possible without causing other audio to be changed in the video

I suggest either living with it or moving farther away from the crossings.. I don't see why you would want to edit it out though because it happened and is part of the scene. Just like I said try not to stand too close and it won't be too annoying.. I have done that with e-bells a couple times, and they can get loud and annoying :lol:
"Ann Arbor 2373 Calling... Milkshake. Over"

All Aboard Amtrak: Northbound, Southbound, and My Hometown

msurailfan
Railroadfan...fan
Posts: 138
Joined: Thu Jan 07, 2010 6:03 pm

Re: How to edit out crossing bell chimes?

Unread post by msurailfan »

YpsiAmtrakBoy wrote:Are you talking about the bell stopping after sounding for a couple seconds? Because if you are tere are many crossings where the bells only turn on when the gates are going down and sometimes up too. If you actually know they are editing out the bell, I'm not sure of that is possible without causing other audio to be changed in the video

I suggest either living with it or moving farther away from the crossings.. I don't see why you would want to edit it out though because it happened and is part of the scene. Just like I said try not to stand too close and it won't be too annoying.. I have done that with e-bells a couple times, and they can get loud and annoying :lol:
Huh....did not know that about the self-stopping bells. I just assumed that people were going in and isolating that audio and muting it. Guess not, though. I'll try to move to spots that are farther away and see how that works. Thanks.

User avatar
Ypsi
The Bestest Railroadfan... fan
Posts: 5510
Joined: Sun Feb 07, 2010 2:13 pm

Re: How to edit out crossing bell chimes?

Unread post by Ypsi »

No problem, and here is what the difference can make by crossing the street too

This video was standing right next to a crossing with an e-bell
https://www.youtube.com/watch?v=zgWPBVGNCZg

This was also shot at a crossing with an e-bell, but I was across the street from the e-bell
https://www.youtube.com/watch?v=k546RC8c0wo

The difference of a couple lanes of the road can really be quite a bit and help prevent the crossing bells from dominating the video

And lastly this one was shot a crossing like what I talked about, the gates go down and the bell stops
https://www.youtube.com/watch?v=nFZdQANMyDQ
"Ann Arbor 2373 Calling... Milkshake. Over"

All Aboard Amtrak: Northbound, Southbound, and My Hometown

User avatar
Clay320
Railroadfan...fan
Posts: 373
Joined: Thu Apr 22, 2010 6:37 pm
Location: Deerfield MI

Re: How to edit out crossing bell chimes?

Unread post by Clay320 »

Not very feasible to edit out like that on iMovie, probably possible but not worth the headache of fighting the program and making it sound good. Creative camera positioning as said would prolly be the way to go.

If you were so inclined to do it though, you'd have to dub in audio from another point in your video, or from a entirely different clip. But you have to pick something that would fit in, which can be hard as there is a lot of sound going on and its all changing. You might get away with being able to paste something in post loco where the click-clack of the cars are somewhat uniform. But would be near impossible when the train is approaching with horn and varying noise levels. And even then it'd easily be able be several hours of editing for a several minute video of a few crossings that sounds organic. And thats on a good editing program, not iMovie which gets very clunky if you get too detailed in your edits.

So all that to say, you could edit out the bells. But you could also edit out the whole train visually if you really wanted also, but that doesn't mean its the way to go! :)


The 70D is a nice camera, I've been looking at getting one myself for film school. If you want something more than iMovie, try Adobe Premiere. Works on Mac and PC and is subscription based(but not cloud based) at like $20 a month I think, and for $40-50ish a month you can get all of Abobe's programs, good deal if you are using it often.

User avatar
J T
Hates Supper
Posts: 11367
Joined: Mon Dec 11, 2006 7:23 pm
Location: Grand Rapids
Contact:

Re: How to edit out crossing bell chimes?

Unread post by J T »

msurailfan wrote:I just assumed that people were going in and isolating that audio and muting it. Guess not, though
Current consumer grade technology doesn't allow for that. Perhaps the techno wizards on CSI:Miami have figured it out, but in the real world that possibility pretty much does not exist. Think of it kind of like trying to remove an egg from a finished cake.

Nice camera, by the way. That will most likely be my next camera body purchase when one of my 60Ds has died.
https://www.flickr.com/photos/jimthias/
GRHC - you know every night I can imagine he is in front of his computer screen sitting in his underwear swearing profusely and drinking Blatz beer combing the RailRoadFan website for grammatical errors.

User avatar
Ypsi
The Bestest Railroadfan... fan
Posts: 5510
Joined: Sun Feb 07, 2010 2:13 pm

Re: How to edit out crossing bell chimes?

Unread post by Ypsi »

J T wrote: Perhaps the techno wizards on CSI:Miami have figured it out
I always love how on TV shows they can take a super blurry/ fuzzy surveillance camera image, and with one click to make it look perfect to ID the suspect or whatever.. now if only we could use that same TV show technology to improve railfanning videos and photos :lol:
"Ann Arbor 2373 Calling... Milkshake. Over"

All Aboard Amtrak: Northbound, Southbound, and My Hometown

User avatar
J T
Hates Supper
Posts: 11367
Joined: Mon Dec 11, 2006 7:23 pm
Location: Grand Rapids
Contact:

Re: How to edit out crossing bell chimes?

Unread post by J T »

YpsiAmtrakBoy wrote:
J T wrote: Perhaps the techno wizards on CSI:Miami have figured it out
I always love how on TV shows they can take a super blurry/ fuzzy surveillance camera image, and with one click to make it look perfect to ID the suspect or whatever..
And the investigator always has to tell the tech geek to "zoom in more" or "make it sharper" as if he couldn't figure that out on his own.
https://www.flickr.com/photos/jimthias/
GRHC - you know every night I can imagine he is in front of his computer screen sitting in his underwear swearing profusely and drinking Blatz beer combing the RailRoadFan website for grammatical errors.

msurailfan
Railroadfan...fan
Posts: 138
Joined: Thu Jan 07, 2010 6:03 pm

Re: How to edit out crossing bell chimes?

Unread post by msurailfan »

:lol: I feel like a stupid now. I had never heard of these self-shutting-off bell crossings so I made a faulty assumption I shouldn't have. Thanks for the heads up, guys.

So far, I'm loving the camera. JT, I upgraded from a 50D. Haven't noticed a ton of difference in image quality but the added aspect of video is enough to have me doing backflips. The Servo autofocus in videomode isn't the greatest but it works very well. Having to manually focus video was a concern I had with other bodies.

I'm heading out for an adventure tomorrow to San Bernardino and Cajon Pass, CA. I'll do my best to get some shots up on the site this weekend.

User avatar
J T
Hates Supper
Posts: 11367
Joined: Mon Dec 11, 2006 7:23 pm
Location: Grand Rapids
Contact:

Re: How to edit out crossing bell chimes?

Unread post by J T »

Sounds like a fun trip. Good luck! :)
https://www.flickr.com/photos/jimthias/
GRHC - you know every night I can imagine he is in front of his computer screen sitting in his underwear swearing profusely and drinking Blatz beer combing the RailRoadFan website for grammatical errors.

User avatar
Jochs
Iron Horse Whisperer
Posts: 7279
Joined: Sat Feb 13, 2010 4:52 pm
Location: On my laptop!

Re: How to edit out crossing bell chimes?

Unread post by Jochs »

msurailfan wrote::lol: I feel like a stupid now. I had never heard of these self-shutting-off bell crossings so I made a faulty assumption I shouldn't have. Thanks for the heads up, guys.
I have not seen any of those around me in SW MI, but they do occur in Indiana, especially in downtown places like Porter and Elkhart.

Also, the bells on the Blossomland drawbridge in St. Joseph, MI ( Highway M-63) has bells that ring only when the gates are going up and down.
Jeff O.
Celebrating 11 years dial-up free!

(18:36:45) MagnumForce: Railfanning is way more fun when you stop caring about locomotives and signals
(19:11:29) cbehr91: I can't believe I'm +1ing Brent but +1

CSX_CO
Over and Out
Posts: 3434
Joined: Sat Apr 09, 2005 10:34 pm
Location: Indiana
Contact:

Re: How to edit out crossing bell chimes?

Unread post by CSX_CO »

msurailfan wrote::lol: I feel like a stupid now. I had never heard of these self-shutting-off bell crossings so I made a faulty assumption I shouldn't have. Thanks for the heads up, guys.
Contact in the gate mechanism. When the gate is fully down, bell stops. If something gets in the way of the gate, bell keeps ringing. Want to have some fun, while standing at a deserted crossing, lift up the gate a couple of inches...

Practice Safe CSX

bdconrail29
Railroadfan...fan
Posts: 1346
Joined: Sun Feb 21, 2010 11:43 pm
Location: Wadsworth, OH

Re: How to edit out crossing bell chimes?

Unread post by bdconrail29 »

msurailfan wrote::lol: I feel like a stupid now. I had never heard of these self-shutting-off bell crossings so I made a faulty assumption I shouldn't have. Thanks for the heads up, guys.

So far, I'm loving the camera. JT, I upgraded from a 50D. Haven't noticed a ton of difference in image quality but the added aspect of video is enough to have me doing backflips. The Servo autofocus in videomode isn't the greatest but it works very well. Having to manually focus video was a concern I had with other bodies.

I'm heading out for an adventure tomorrow to San Bernardino and Cajon Pass, CA. I'll do my best to get some shots up on the site this weekend.
One downside of trying to use a DSLR for video is focusing. It can be a nightmare. I'm sure though, it is greatly improving.
Brett

User avatar
J T
Hates Supper
Posts: 11367
Joined: Mon Dec 11, 2006 7:23 pm
Location: Grand Rapids
Contact:

Re: How to edit out crossing bell chimes?

Unread post by J T »

bdconrail29 wrote: One downside of trying to use a DSLR for video is focusing. It can be a nightmare. I'm sure though, it is greatly improving.
I shoot video in manual mode and focus just as I would for taking a pic. Haven't had any issues yet. :)
https://www.flickr.com/photos/jimthias/
GRHC - you know every night I can imagine he is in front of his computer screen sitting in his underwear swearing profusely and drinking Blatz beer combing the RailRoadFan website for grammatical errors.

Post Reply