Were there any Griswold-base signals in Michigan?

Any historical questions can be posted here. Answers would certainly help as well :)

Were there any Griswold-base signals in Michigan?

Unread postby Burb8145 » Sun Apr 12, 2015 4:25 pm

Were there ever any crossing signals with the familiar Griswold gate base in Michigan? There were probably not that many, if there were any in Michigan.

If you never saw one before, here's an rxrsignals.net picture of a former crossing near the Orange Empire Railway Museum in southern California that had these signals.
Image
If the women don't find you handsome, they should at least find you handy.
-Red Green
User avatar
Burb8145
Railroadfan...fan
 
Posts: 386
Joined: Tue Jul 30, 2013 2:08 pm
Location: In the Y&.

Re: Were there any Griswold-base signals in Michigan?

Unread postby MQT1223 » Sun Apr 12, 2015 10:02 pm

Burb8145 wrote:Were there ever any crossing signals with the familiar Griswold gate base in Michigan? There were probably not that many, if there were any in Michigan.

If you never saw one before, here's an rxrsignals.net picture of a former crossing near the Orange Empire Railway Museum in southern California that had these signals.
Image


Those Griswold Pedestal Signals were a lot more popular out West, since the Griswold Signal Company was based out of Minneapolis, Minnesota. There are still a lot out there to be found, especially on UP and ex. C&NW lines. Seems like here in the east there was a lot more WRRS stuff then Griswold, RACO, or US&S, although I'm sure some ended up here or there. I do know there is one of the very RARE and iconic Griswold Rotating Stop Sign Signals located in the back of the roundhouse at Greenfield Village. It would be neat to see it operational opposite of their Wig Wag up front. There are less then FIVE of those left in service in the entire COUNTRY. I'm not sure why Griswold opted for those large bases, although it probably held a lot of the individual signal's electronics and the gate motor if one was present.
1223 OUT! President and Founder of the Buck Creek Central, the Rolling River Route! (2012-2017) President and Founder of the Lamberton Valley Railroad, The Tin Plate Road! Proudly railfanning with Asperger's since 1996. :)
User avatar
MQT1223
O Scale Railfanner
 
Posts: 2720
Joined: Wed Sep 10, 2014 1:46 pm
Location: Grandville, Michigan

Re: Were there any Griswold-base signals in Michigan?

Unread postby Saturnalia » Sun Apr 12, 2015 10:33 pm

Yeah, I suspect it was the electrical cabinet. Basically, it is what all the old semaphores were. I'm guessing they were phased out for the bungalows/external cabinets as things became more complex or for ergonomic reasons?
Thornapple River Rail Series - YouTube
Dah Yooper Snowfall Total: 317"
User avatar
Saturnalia
Authority on Cat
 
Posts: 13676
Joined: Wed Sep 28, 2011 7:54 pm
Location: Michigan's Copper Country

Re: Were there any Griswold-base signals in Michigan?

Unread postby MQT1223 » Mon Apr 13, 2015 12:01 am

MQT3001 wrote:Yeah, I suspect it was the electrical cabinet. Basically, it is what all the old semaphores were. I'm guessing they were phased out for the bungalows/external cabinets as things became more complex or for ergonomic reasons?


The entire system was not ran from the cases under the signals. External cabinets were used as well.
1223 OUT! President and Founder of the Buck Creek Central, the Rolling River Route! (2012-2017) President and Founder of the Lamberton Valley Railroad, The Tin Plate Road! Proudly railfanning with Asperger's since 1996. :)
User avatar
MQT1223
O Scale Railfanner
 
Posts: 2720
Joined: Wed Sep 10, 2014 1:46 pm
Location: Grandville, Michigan


Return to Historical Q & A

Who is online

Users browsing this forum: No registered users and 1 guest

x