Re: Appalachian Western Railway
Posted: Sat Jun 16, 2012 11:11 am
Do you connect with Marquette Rail anywhere? We've got the current CSX trackage in MI (and down to Toledo & Porter), along with the MQT, MMRR, LSRC, & C&M
I don't think I connect with Marquette Rail. I just edited my first post detailing the history and included the system map.MQT3001 wrote:Do you connect with Marquette Rail anywhere? We've got the current CSX trackage in MI (and down to Toledo & Porter), along with the MQT, MMRR, LSRC, & C&M
DT&I wrote:Well I like the idea of the joint line but I run over 35 trains a day on it, soon to be 50 with the completion of AW's phase 1, but we could jointly triple track it so our trains don't have to wait long when phase 1 is done.conrailman75 wrote:Sorry but after learning that TSCR claims the same mainline I was offering you trackage rights on, I have to withdraw my offer of trackage rights over the PC because that's the route your trains are going to take anyways. Didn't realize that until I seen DT&I's map he drew up this morning.
Nope you don't. We're thinking about buying the line south of Porter that CSX owns.....extension to indianopolis is possible too....we'd create an interchange if anything ever happensTCtrainguy17 wrote:I don't think I connect with Marquette Rail. I just edited my first post detailing the history and included the system map.MQT3001 wrote:Do you connect with Marquette Rail anywhere? We've got the current CSX trackage in MI (and down to Toledo & Porter), along with the MQT, MMRR, LSRC, & C&M
We don't have tracks in Marion, we have the ex-NYC to the west. That does cross your Chicago line and were hoping to build an interchange there.TCtrainguy17 wrote:DT&I wrote:Well I like the idea of the joint line but I run over 35 trains a day on it, soon to be 50 with the completion of AW's phase 1, but we could jointly triple track it so our trains don't have to wait long when phase 1 is done.conrailman75 wrote:Sorry but after learning that TSCR claims the same mainline I was offering you trackage rights on, I have to withdraw my offer of trackage rights over the PC because that's the route your trains are going to take anyways. Didn't realize that until I seen DT&I's map he drew up this morning.
DT&I here's the routing your trains will be taking over the AW. The red line is the route before the capacity expansion project. The dark green line to the north is the route after the project is completed. After looking at your map you posted last night I discovered the TSCR detroit-columbus line crosses the AW at Marion, OH and after the capacity project is complete, it is an alternate to handing the trains over in Cleveland.
If you do we'd like to run a NYC-Indianapolis intermodal hotshot. We've been trying to get to Indianapolis for awhile now.MQT3001 wrote:Nope you don't. We're thinking about buying the line south of Porter that CSX owns.....extension to indianopolis is possible too....we'd create an interchange if anything ever happensTCtrainguy17 wrote:I don't think I connect with Marquette Rail. I just edited my first post detailing the history and included the system map.MQT3001 wrote:Do you connect with Marquette Rail anywhere? We've got the current CSX trackage in MI (and down to Toledo & Porter), along with the MQT, MMRR, LSRC, & C&M
The AW comes into Columbus from the south so thats out of the question for intermodal. As long as the other route is intermodal friendly and can meet the minimum speed of 55mph required for intermodal to be feasible, we will accept your offer.conrailman75 wrote:Now my Penn Central can definitely get you to Indianapolis rather easily Since it appears you claim the EL Dayton Branch that runs right next to my ex NYC mainline thru my new hometown of Fairborn, OH I can get your trains to connect onto my PC at Dayton and then we'd run it down to Carlisle, OH where it would turn onto the Carlisle Branch and run up to West Manchester, OH and then get onto the Richmond to Indianapolis mainline that is my main route into Indy. If you want to run them out of Columbus, then I could send your trains across the ex PRR Pan Handle main Columbus to Ridgeville, IN where you'd turn and head south on my Ft. Wayne Secondary to get to Richmond and then get onto the mainline to Indy that way. I have even more roundabout ways to get to Indy, but you get the point. Let me know if you want to take advantage of this offer and I'll fit you into the picture. Also, if there is anywhere else you want to reach that my PC goes to, let me know.
I understand, they will be given the highest priority along with our intermodals. All PC and TSCR manifests will be halted for them if needed but we'll try to keep traffic moving.conrailman75 wrote:DT&I, I checked my schedules and I run 10 trains a day on the Columbus to Pittsburgh line, with two being first class mail trains and two being hot intermodal trains. I'm willing to help pay to triple track the line if it helps keep the high priority mail trains on time, because those two trains cannot be delayed for anything!
A work train is currently at Kenton installing an 8,000ft siding for interchange with the TSCR.DT&I wrote:Yes Kenton is were we cross.
Joint PC/AW Indianapolis-NYC intermodal service will begin on July 1, upon agreement of Conrailman75. Interchange will take place at Dayton, OH. AW run through power is available if you want.conrailman75 wrote:Oh, the route is intermodal friendly because I'm looking into running an intermodal train Ft. Wayne to Cincinnati and the Carlisle Branch is the only way I can get to Cincy out of Ft. Wayne and the entire route is rated at 60 MPH for intermodal trains.
Okay do you want them to be repainted, patched, or shipped untouched?Michigan Railfan wrote:The DR&EC will take C30-7's 2900-2909.
That's fine with me, DTCX will take the rest of the C30-7's, and if no one wants them, the SD50's too, but if someone wants them they can take them before we do.TCtrainguy17 wrote:Ok they'll be untouched and shipped as soon as DT&I agrees to interchange at Cleveland.
Its a deal then, check my PC thread for the official press release and run through power will be allowed.TCtrainguy17 wrote:A work train is currently at Kenton installing an 8,000ft siding for interchange with the TSCR.DT&I wrote:Yes Kenton is were we cross.Joint PC/AW Indianapolis-NYC intermodal service will begin on July 1, upon agreement of Conrailman75. Interchange will take place at Dayton, OH. AW run through power is available if you want.conrailman75 wrote:Oh, the route is intermodal friendly because I'm looking into running an intermodal train Ft. Wayne to Cincinnati and the Carlisle Branch is the only way I can get to Cincy out of Ft. Wayne and the entire route is rated at 60 MPH for intermodal trains.