CSX Train Location Updates: May, 2020

[trnwatcher]

08:41 EDT Q32710 WB GRANDVILLE. SOUNDS LIKE THEY HAVE WORK AT HOLLAND.

[donnieland]

327 917a at 19,1
416 axles - 5848' - 97 cars - with 3 csx 6 axles, followed by the cn 6 axle and last was a csx 4 axles
zeeland - app slow
east wy - approach
wy - restricting
working wy

[Tom49801]

08:41 EDT Q32710 WB GRANDVILLE. SOUNDS LIKE THEY HAVE WORK AT HOLLAND.

Appears it was around 9:19am when Q327-10 with CSX engine #7203 leading was by the DD at mp CG19.1 & did go into Waverly/Holland. From a radio call yesterday, Q327 was to have the power from Q326 the CSX #7203 + #4225 and towing the CSX #735 & CN #8911. Don't know what the 5th 4axle CSX engine is that Donnie had reported. He would then have gone into Waverly with 97 cars.
At 10:19am, Q327 has signal to depart Holland mp CG25.3

[Tom49801]

Q327-10 @ 11:37:20am at Bangor's Center St crossing mp CG60.35 with CSX engines #7203 + #4225 + #735 + CN #8911 + CSX #2692 & 85 cars.

[Jochs]

Q326-10 is currently going through Benton Harbor. Sounds like CSXT 3332 leading.

[Tom49801]

Q326-10 @ 2:34:16pm at Bangor's Division St crossing mp CG60.93 with CSX engines #3332 + #8823 & a mid-DPU CSX #7005 & 132 cars. DP was after the 73rd car.
Q326-10 @ 3:05pm reported by the DD mp CG44.2 with 546 axles & 8,002 feet long.
Q326-10 @ 4:22pm in Grand Rapids asking for yarding instructions.

[BL2-1843]

V76406 grain empty went to Webberville this afternoon, sort of. 5321+853 on the head end with 90 cars. Knowing this train was scheduled for Webberville, and never seeing the V-94407 empty that went there on May 7th come back east, it was no surprise when V764 went by the plant to run around its train that the crew called dispatch to inform them there was already a train there. Powers to be told the crew to tie down their train at Williamston, go pick up the loads and take it to Fowlerville , come back and get the empties and spot that That plan was later changed, perhaps because the first train was not even ready to move yet. So, the crew ran around it train and took their power to the plant and taxied home. So much for the right hand not knowing what the left hand is doing. The single unit power that was on the first train, (735) went to Chicago on Q327 today.

[Tom49801]

D700-10 @ 10:04pm westward reported from mp CG30 with CSX engine #6914.
D700-10 @ 10:44:15pm westward at Bangor's Center St crossing mp CG60.35 with CSX engine #6914 & 4 cars (1 Tank & 3 CH). He'll be working at Hartford mp CG68.8

[georgehmanning]

@12:19:01am ET eastbound D700 with CSX #6914 and 8 cars arriving Bangor Michigan MP 60.72

[Tom49801]

Q327-11 @ 06:59am was reported by the DD mp CG19.1 with 224 axles & 2,579 ft long. CSX #7005 + 1 & 53 cars going into Holland. The CSX #7005 was the mid-DPU on yesterday's Q326-10.

[LansingRailFan]

V76406 grain empty went to Webberville this afternoon, sort of. 5321+853 on the head end with 90 cars. Knowing this train was scheduled for Webberville, and never seeing the V-94407 empty that went there on May 7th come back east, it was no surprise when V764 went by the plant to run around its train that the crew called dispatch to inform them there was already a train there. Powers to be told the crew to tie down their train at Williamston, go pick up the loads and take it to Fowlerville , come back and get the empties and spot that That plan was later changed, perhaps because the first train was not even ready to move yet. So, the crew ran around it train and took their power to the plant and taxied home. So much for the right hand not knowing what the left hand is doing. The single unit power that was on the first train, (735) went to Chicago on Q327 today.

A crew came out from GR to run the train at ADM Webberville to Plymouth last evening.

[CantBeShook.WeHot]

q32611 on duty chicago. q32711 waverly holland MI. d70010 arrived haolland 3am. d70211 started holland 7am. d70710 by lake odessa 8:20am. d70811 set for 2pm lansing.
n80011, n80012, e80011 in system. q50811 troy OH. q50910 galatea OH.

[Tom49801]

Q327-11 @ 08:42am reported on the move out of Holland mp CG25.3 with CSX engine #7005 leading.

[LansingRailFan]

D707 back at 10:00 AM. Had 15-20 cars for StoneCo. They already took a bunch of loads Friday or Saturday as well.

Potash cars for Webberville are still in Ensel as well.

Yard is the fullest it’s been in weeks.

Also, the new pair is 4035/8823 and both are facing EB currently.

[Tom49801]

Q327-11 @ 10:04:34am Bangor's Center St. crossing mp CG60.35 with CSX engines #7005 + #3332 & 85 cars. He had picked up 32 cars from Holland this morning.
Q327-11 @ 11:08am cleared the St Joseph Bridge.

[TSS]

Q326 just passed Glenlord Rd./Stevensville.

[Tom49801]

Q326 just passed Glenlord Rd./Stevensville.

Q326-11 @ 1:46pm cleared the St Joseph Bridge. CSX engine #3319 leading.
Q326-11 @ 2:36:16pm Bangor's Division St crossing mp CG60.93 with CSX engines #3319 + #7203 & 115 cars. No pushers being added today.
Q326-11 @ 3:58pm reported by the DD at mp CG19.1 No Holland or Waverly stops made today.

[SW]

SB D735 just cleared 7 Mile Rd. CSX 5244 + 5469 (again) + 93 cars, all tankers except 1 lone boxcar somewhere near the middle. Had 24 cars of #3257 Hot Asphalt tankers at the front again.

[Tom49801]

D700-11 @ 8:32pm westward siding to main at Holland mp CG25.3 with CSX engine #6914. Early start for D700 tonight & has work in Hartford mp CG68.8
​D700-11 @ 9:20:59pm westward Bangor Station mp CG60.5 with CSX engine #6914 & 10 cars (8 CH, 1 hopper & 1 tank).

[Jochs]

D700-11 is currently working at Hartford.