CSX Train Location Updates - September 2017

[Jochs]

P370-08 is currently departing St. Joseph. Sounds like AMTK 27 leading, and they'll go into the siding at Wells for Q327, which is over 12000ft this evening.

[Jochs]

Q326 is currently going through Benton Harbor.

[Tier4GEVO]

Q326 is currently going through Benton Harbor.

EB CSX Q326-09 cleared Riverside (CG 80) at 10:00 AM:
CSXT CW40-9 #9022
CSXT ES40DC #5329
109 cars long.

[trnwatcher]

Q326 is currently going through Benton Harbor.

EB CSX Q326-09 cleared Riverside (CG 80) at 10:00 AM:
CSXT CW40-9 #9022
CSXT ES40DC #5329
109 cars long.

ARRIVED WYOMING 12:20 EDT.

[trnwatcher]

1900 EDT Q32709 BEGINNING THEIR DOUBLE AT LAMAR.

[trnwatcher]

1900 EDT Q32709 BEGINNING THEIR DOUBLE AT LAMAR.

2015 EDT Q32709 WB GRANDVILLE CSXT 9022. D907 EB THORNAPPLE CSXT 50.

[MQT1223]

327 underway... clear Gville

[Tier4GEVO]

Some noteworthy CSX shenanigans:

As of 9/8/2017 CSX Q241 now originates back in Detroit. Train runs to Baldwin, Florida.

Some extra trains will be running around Michigan. Probably to alleviate the yard congestion:

CSX X369-11 is planned from Walbridge to Chicago. Should depart Walbridge late tonight. Train should be heading up to Plymouth, then taking the Plymouth and Grand Rapids subdivisions.
CSX S395-10 is planned from Willard to Detroit. Should be departing Willard soon.

[justin_gram]

327 underway... clear Gville

Q327-09 west at Stevensville at 12:28. CSXT 9022 leading.

[SD80MAC]

From a friend in Howell, X36911 west went by Ogihara about 10 minutes ago. 2 SD40-3s and just shy of 100 cars. Q326 near Benton Harbor per the super scanner.

[BL2-1843]

From a friend in Howell, X36911 west went by Ogihara about 10 minutes ago. 2 SD40-3s and just shy of 100 cars. Q326 near Benton Harbor per the super scanner.

Wasn't me. 4023+4017, 95 cars.

[Tlout]

BNSF 9235, 8775 north at Riley St. Holland 10:25 AM. BNSF 9155, 6337 pushing.

[trnwatcher]

From a friend in Howell, X36911 west went by Ogihara about 10 minutes ago. 2 SD40-3s and just shy of 100 cars. Q326 near Benton Harbor per the super scanner.

Wasn't me. 4023+4017, 95 cars.

BOB GOT TO SEE A REAL TRAIN AND IN DAYLIGHT NO LESS.

[CN_Okemos]

From a friend in Howell, X36911 west went by Ogihara about 10 minutes ago. 2 SD40-3s and just shy of 100 cars. Q326 near Benton Harbor per the super scanner.

X369-11 Clear okemos mp 80 at 10:32

[trnwatcher]

Per superscanner...X36911 wb 114. Q326 eb fennville. As of 1135am.

[GP30M4216]

1220 hrs- csx Q326 with 3459 and 7913 clear Zeeland with 344 axles.

[Doktor No]

1220 hrs- csx Q326 with 3459 and 7913 clear Zeeland with 344 axles.

83 cars...maybe someone has discovered that if you DO NOT send cars from Ohio to Chicago then up to GRP you may not need a pusher...send them up via Willard to Toledo and then GRP.
Naaaaaaa. Nevermind.

[bkoole98]

Someone I was talking to at the east end of Wyoming yard at Judd street told me that he saw X369 come into Wyoming yard at roughly 45mph. Anyone able to confirm that? If the crew was unfamiliar with the area and no one up in the the east tower, then I guess there wouldn't of been anyone here to stop them.

[Saturnalia]

Someone I was talking to at the east end of Wyoming yard at Judd street told me that he saw X369 come into Wyoming yard at roughly 45mph. Anyone able to confirm that? I believe him but I sure as heck would've liked to seen it. If the crew was unfamiliar with the area and no one up in the the east tower, then I guess there wouldn't of been anyone here to stop them.

Absolutely crap. Speed limit is 25 mph on the main, which I assume he was on. If you're used to 10 mph trains and one blows by at 25 it'll seem fast, but somebody served you a hyperbole.

"Unfamiliar" crews don't happen (or at least aren't an excuse)...you have to be qualified to run whatever territory you're on or have a pilot.

[justin_gram]

Eb at Vine at 15:10.

Anyone have a location on the X train?