CSX Train Location Updates: 11/10/16

[Jochs]

Q327-09 is currently going by Riverside. Sounds like CSXT 7742 leading.
edit: 2:22am: sounds like they lost 7742 and stalled on the hill in St. Joseph.

[justin_gram]

Q32709 eastbound (what? Still messing with the hill stall?) has only 12 axles, 130 feet at 91.9 DD. CSXT 125 Leading. Approach Limited Vine, Approach Slow Hilltop...

East through downtown at 06:50 EST. Saw that on the camera link in my signature.

[CantBeShook.WeHot]

q32709 at benton harbor, last updated 7am.
d70710 and d70810 should run this afternoon. d90809 back to lansing 8am.
no coal loads seen to west olive. e80008 in system.
amtrak p37110 by sawyer.

[~Z~]

Per da scanner, D70010 is west at Hudsonville. After working Holland,they are planning to drop a car off at Zeeland Lumber on the way back to GR. That'll be an interesting shove 10:16am
Y10610 - preparing to depart GR eastbound at 10:25am.

[GP30M4216]

Per da scanner, D70010 is west at Hudsonville. After working Holland, they are planning to drop a car off at Zeeland Lumber on the way back to GR. That'll be an interesting shove 10:16am

There are two empty centerbeams on the Zeeland Lumber spur which I assume they will pickup. It's an trailing switch for an eastbound move, so the shove shouldn't be too bad There was a nice looking BN covered hopper on the Zeeland elevator spur over the weekend which was picked up in the past couple days.

[~Z~]

Per da scanner, D70010 is west at Hudsonville. After working Holland, they are planning to drop a car off at Zeeland Lumber on the way back to GR. That'll be an interesting shove 10:16am

There are two empty centerbeams on the Zeeland Lumber spur which I assume they will pickup. It's an trailing switch for an eastbound move, so the shove shouldn't be too bad There was a nice looking BN covered hopper on the Zeeland elevator spur over the weekend which was picked up in the past couple days.

Hm.. guess they could grab the empties, then shove the load in. I've seen Y121 work there a few times that they have the load in the front that they shove down the siding. Pull west into Zeeland Lumber, attach to the empty, keep going west across elm st, then push east with the load and put it on the southern most track on their property to get it out of the way so they can leave. Maybe they don't do that move anymore and don't use the southern most track now at Zeeland Lumber.

[amtrak1007]

something was lined up from Seymour to WE Lake O 1907....

1919 - Breton Road
1923 - WE FOX
1925 - EE FOX
1928 - Thornapple
1930 - Timpson
1937 - Alto
1941 - WE Elmdale
1943 - EE Elmdale

[justin_gram]

Amtrak P370-10 with AMTK 1 leading east has 20 axles, 370 feet at 131.3 DD. Running about 10 minutes late.

[amtrak1007]

Someone else is lined east at Seymour

[justin_gram]

Amtrak P370-10 with AMTK 1 leading east has 20 axles, 370 feet at 131.3 DD. Running about 10 minutes late.

20 axles, 362 feet at 91.9 DD. Sounded like an Approach indication at Hilltop.

[~Z~]

Csct 8596 and 8550 east at Godfrey in GR with about 40 cars. Likely d70710. Seeing a train while biking? That's a win.

[SD80MAC]

The track at Zeeland Lumber which required a car to be on the front of the engine when going to Zeeland was removed earlier this year. Now the only time Y121 shoves to Zeeland is when they have a hopper for Vandenbosch.

[CN_Okemos]

Eastbound clear Okemos 14:48

[Jetlink]

Lake Odessa is line for a westbound