CSX Train Location Updates November 2019

[georgehmanning]

last night a little after 20:00 ET Q327 passed DD 44.2 which reported a hot box on axle #48. Q327 stopped. a little later tower told Q327 to back up and take siding at Wells MP 43 to clear the track for AMTK 371 and wait because a Train Master was coming out of Grand Rapids. east bound AMTK 371 at around @22:13pm ET stopped at Kirk, AMTKAlert reported AMTK 371 was stopped do to a disable train on the tracks. at around @12:09:41am ET AMTK 371 arrived Bangor Michigan. @04:16:17 west bound Q327 passed thru Bangor Michigan. this all happened on the CSX Grand Rapids Subdivision Line

[SD80MAC]

Q327 ended up setting out a bad order covered hopper in the siding at Wells, still there this morning.

[J T]

Q326 stalled on the hill. D801, pulling a coal train out of Grand Junction, left their train on the main at Wells to go push 326 up the hill. BNSF units 8420 and 6307.

[kd_1014]

CSX 9969 hooked up to the Geometry train is sitting at East Tower in Wyoming atm.

[kd_1014]

Also K862 is in the system. At EE Sawyer at 13:09. Not sure what the power is.

[georgehmanning]

​@02:31:43pm ET at MP 60.72 Bangor Michigan east bound Ktrain with CP 8575 & CP 8028 and 83 cars

[J T]

Q327 ended up setting out a bad order covered hopper in the siding at Wells, still there this morning.

[GP30M4216]

22:10 - Q327 west at Bangor, with a GEVO and G:P40-2 for power, with 52 cars. Earlier, they had a restricting signal to cross over into the yard at Waverly at 19:00, not sure how many cars they set off.

Earlier still, Q326 was rolling through Zeeland at 12:15, and yarding their train just before 13:00. They had two GE's elephant style facing east.

[BL2-1843]

Q32917 went west by Howell at 08:52 with CSX 5378+5250 and GP38-2 2697. 111 cars which is the average amount number when they have over 100 cars. Q32817 went east at 07:00, fairly close to a normal time after three days in a row of being "late". CSX 5474 and CSX 1 with 56 cars.

[dave989]

K862 departing Wyoming Yard at 13:03. The second CP unit looks like its had work done on it.

[AFLK]

Where dose the K train go too?

[kd_1014]

Where dose the K train go too?

Webberville

[BL2-1843]

K862 departing Wyoming Yard at 13:03. The second CP unit looks like its had work done on it.

The second CP unit on K862, 8028 was rebuilt from CP 9575 in 2018. If it still carried that number, power for this train would have been 8575+9575.

[CantBeShook.WeHot]

q32618 Curtis IN. q32717 arrived Chicago 12:30am. q32818 arrived Detroit 7:30am. q32918 Fowlerville MI.
d70717 arrived lansing 8am. d70818 set for 2pm lansing.
n80017 grey MI since 5am. n80018, e80018 in system. e80017 arrived Chicago 4am.
q15018 set for 11am north Baltimore. q15118 set for 10:30am Detroit. q13217 Stanley OH. q50818 on duty Cincinnati. q50918 turnpike OH. q38618 walbridge. q38718 walbridge.
w00318 geometry train on duty grand rapids, set to go east.

[BL2-1843]

Q32918 by Howell at 08:00. Pair of EMDs, CSX 4064-4028 with 60 cars. Q32818 went east at 05:54 with CSX 5383+5482 and only 20 cars.

[KC8RBK]

Q32918 by Howell at 08:00. Pair of EMDs, CSX 4064-4028 with 60 cars. Q32818 went east at 05:54 with CSX 5383+5482 and only 20 cars.

329 clear 101 at 1050. CP auto rack bringing up the rear...which is all I saw

[SD80MAC]

Q329 met Y106 at Seymour at 12:17. Y106 East with CSX 4019, 2 gons, 3 boxes, 2 years pipe flats and a plastics hopper at 12:25.

[~Z~]

q32618 just hit the MI border, should be going dead pretty soon. N80017 dead at Grey. D80118 running later afternoon. W00318 geometry train probably leaving GR eastbound 4pmish... don't quote me on that

Q32618 ended up going east through Bangor at 5:24pm, UP engine leading two CSX locos.

[AFLK]

Dose anyone have any word on W003?

[SD80MAC]

Dose anyone have any word on W003?

Did not move today.